The page output is a low voltage input to your amplifier.
The aux ringer is a dry contact closure. You need an ampliflier that has a tone generator built in that will operate when the contact is closed or a stand alone generator that operate on a closure and the output can be paralleled to the page output.
Both Aux and Page ports from KSU go to this ringer then back out to the speaker. You have the ability to turn the ringer off on this device if the Valcom speaker is good enough.
There is a way to do what you want;I did it using a Valcom 5 watt horn and a M7100 Phone's bell port.Aux ring contacts and page relay contacts.I can' find my wiring drawings and can't remember the wiring connections.The tip and ring to the horn were split between the make/brake contacts on the Aux and the page shunt relay?
This was on a 3x8 and it was about 10-12 years ago.The only trouble I had was someone turned down the ring on the M7100.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.