Hello,
I know how to access the Shell and type ataShow to find the hard drive information on the 3300. Usually, the Model number will indicate the hard drive size. The problem I have is when the system is a MXe with a Raid Controller. The ataShow command only shows the model of the Raid Controller "ADARM-01C".
Does anyone know how to check the hard drive size of the drives that are connected to the Raid Controller? That is to mean without going to site and physically checking.
Most should be 80GB, but I know that I personally put in a few of the earlier MXe systems that had 40 GBs.
_______________________________________________________________
If you did not take enough time to get it right the first time...
What makes you think that you have time to fix it?
I know how to access the Shell and type ataShow to find the hard drive information on the 3300. Usually, the Model number will indicate the hard drive size. The problem I have is when the system is a MXe with a Raid Controller. The ataShow command only shows the model of the Raid Controller "ADARM-01C".
Does anyone know how to check the hard drive size of the drives that are connected to the Raid Controller? That is to mean without going to site and physically checking.
Most should be 80GB, but I know that I personally put in a few of the earlier MXe systems that had 40 GBs.
_______________________________________________________________
If you did not take enough time to get it right the first time...
What makes you think that you have time to fix it?
