check version on SD card without plugging into IP Office

[RugyDoser]

How do I check version software on SD card before plugging into IPO V2 so I prevent putting wrong version software on IP office

 

[tlpeter]

You recreate the card in a PC with the correct version.
You could check the time/date of the ip500v2.bin file (you need to know these if you want to use this method)
Depending on the PCS level of the card you can assume a certain release.

Further on, no you cannot do that.



BAZINGA!

I'm not insane, my mother had me tested!

 

[amriddle01]

You must have a copy of the config, look there

 

[tlpeter]

Andy, i assume this is about a new system with a new SD card

BAZINGA!

I'm not insane, my mother had me tested!

 

[IPGuru]

if it is a new system & a new SD card then you should always assume the firmware on the card is out of date & re-create it


Do things on the cheap & it will cost you dear

 

[critchey]

On newer versions (believe R8.0 or so on) there is a filelist.txt located on the SD card. Opening that shows the version towards the top of the file.

The truth is just an excuse for lack of imagination.

 

[amriddle01]

It's written on the packaging/label of the SD card ...if it's new