operadornine
IS-IT--Management
Hi all,
I have to upgrade channels in a 3.1 please can some tell me how to do this?
thanks.
I have to upgrade channels in a 3.1 please can some tell me how to do this?
thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
channel upgrade
- Thread starter operadornine
- Start date
- Status
darioperezb
Vendor
Well, it's quite straightforward, just make sure you have a database and an audio backup before hand:
1. Run the logger setup and upload the new configuration file.
2. Reboot the logger
3. Make sure the new channels are shown in the sysadmin
4. You may need to unmapped all the channels and map them again.
5. It should take a couple of hours with tests included.
Regards,
1. Run the logger setup and upload the new configuration file.
2. Reboot the logger
3. Make sure the new channels are shown in the sysadmin
4. You may need to unmapped all the channels and map them again.
5. It should take a couple of hours with tests included.
Regards,
- Status
Similar threads
- Locked
- Question