Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Changing SMTP Server For Sending Voicemail to Email

Status
Not open for further replies.

nromanek1

IS-IT--Management
Apr 14, 2016
4
US
Hi,

I want to start off by thanking the community for being so helpful, it's really great to have a resource like this. I wish I contributed more. Currently, I'm trying to change the SMTP server in Cisco Unity Connection Administration to point to our cloud-based email service provider so voicemail emails are no longer sent to our old in-house Exchange server.

I log into Cisco Unity Connection Administration, go to SMTP Configuration > Server - the field there says SMTP domain - I put in something.smtp.mx.somewhere.serversomething.net (which I believe is correct, this is for unauthenticated relay). Would it be better to use the IP address here? It's set to port 25 which should be fine. It said reset 3 different services, I went into Cisco Unity Connection Serviceability and reset the 3 (Conversation manager, Message Transfer Agent, and SMTP Server). Hopefully, I did the aforementioned correctly.

The part that I'm getting hung up on is the 'Smarthost' section, SMTP Configuration > Smarthost in CUCA . I spoke with our email support team and they said I shouldn't have to set this part up (it was pointed to the private IP of our old exchange server) - but I could set one up if necessary.

I want to make sure I'm doing everything else right first and not skipping anything before setting up a Smarthost with our Email Service provider. I went to Users > Edit Message Actions > Voicemail - then for voicemail I set it to Accept and Relay the Message, I then put in the email address that I want it to be sent to.

I also went to SMTP Proxy Addresses and added the email address that I'm trying to get it to send to there - at this point I'm grasping at straws. I'd like to know if anyone can catch a mistake that I'm making or if I just have to bite bullet and setup a 'Smarthost' with our email service provider.

Thank you for any insight you may be able to provide.

Regards,

Nick



 
First do you have the server setup to even support DNS? If yes, then definitely use DNS vs IP. Anyhow, I have never personally seen off prem setup in the smtp settings. I do use off prem email however. I just use UM accounts.

Certifications:
A+
Network+
CCENT
CCNA Voice
TVOICE
CAPPS
CIPTV1
CIPTV2
 
Yes, it supports DNS. I'm not sure about the Smarthost vs the SMTP Domain, however. Do both fields need to be filled out?

Cisco Unity Connection doesn't appear to support authenticated SMTP relay.

Can I leave the SMTP domain blank and just put the SMTP server info in the Smarthost section?

Or can I do the opposite and leave the Smarthost section blank?

Thank you for your earlier response.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top