Changing Ring Tone 1

[BK5426]

Hey All,
I recently was ask to change the ring tone on 6 phones. thought it was simple as change to cls DRG x however 3 out of the 6 changed the rest didnt. Is the something else that might need to be change within the cls to allow for the change? Thanks

 

[phonz1]

(DRDD) Distinctive Ringing by Directory Number Denied.
DRDA Distinctive Ringing by Directory Number Allowed.

 

[GHTROUT]

If 3 of the 6 changed, and 3 did not change - then I'd check the programming again. DRGx will change the ring of all the lines on the phone.

CLS DRDA allows you to change the ring of individual DN Keys. Adding that alone does nothing - you have to edit each key and tell each key how to ring with the DNRI and DRNO prompt.



~~
Gene at www.GHTROUT.com

 

[GHTROUT]

One other thing... if these are 3903 or 3904 phones, you change the ring at the phone itself. Changing the DRGx value is good for 2008 and 2616

~~
Gene at www.GHTROUT.com

 

[BK5426]

All sets are 2616 I will look at this now and update thanks for the info.

 

[BK5426]

ghtrout,
hey bud ok all the programing in the cls is the same i guess i need to try to do it line for line. How do i get to dnri dnro prompt. Thanks

 

[GHTROUT]

Print the phones out. You might already have CLS DRDA. If not, add CLS DRDA

Now enter one of SCR Keys like you were just going to add it new. . When you hit enter, after the KEY, it will prompt you with DNRI and DNRO. Leave DNRO as is. Only change the DNRI from it's default 0 value.

~~
Gene at www.GHTROUT.com

 

[BK5426]

only getting the prompt to add name
ld 20

REQ: chg
TYPE: 2616
TN 24 1 10 11
ECHG yes
ITEM key 0 scr 8421
HNT FNA
MARP
CPND
VMB
KEY

 

[GHTROUT]

I don't see that you added CLS DRDA first.





~~
Gene at www.GHTROUT.com

 

[BK5426]

That did thanks much G