Hi all,
We have one FAStT 500 with two enclosures with 20 disks.we have created 3 arrays on 2 enclosures and the arrays are configured on RAID-5.Now i have to change the RAID level to RAID -10.
1.)My question is can we change the RAID levels of FAStT on the fly??or i have to break the current RAID level first after taking the whole backup and then re-create it?
2.)Pls let me know if any of u have the document to configure the load balancing of FAStT controllers to handle different disks in array.I know a solution for load balancing that i have to assign different LUN Mappings for each disks.but i don't know how to do it.
3.)Is there any procedure to recover the data from FAStT incase of multiple disk failure on RAID-5.I have the document to recover data from RAID -5 incase of Multiple disk failure but the document is not for FAStT Family.
Thanx in advance to Storage devices Guru's
Regards
Arvind shrivastava
We have one FAStT 500 with two enclosures with 20 disks.we have created 3 arrays on 2 enclosures and the arrays are configured on RAID-5.Now i have to change the RAID level to RAID -10.
1.)My question is can we change the RAID levels of FAStT on the fly??or i have to break the current RAID level first after taking the whole backup and then re-create it?
2.)Pls let me know if any of u have the document to configure the load balancing of FAStT controllers to handle different disks in array.I know a solution for load balancing that i have to assign different LUN Mappings for each disks.but i don't know how to do it.
3.)Is there any procedure to recover the data from FAStT incase of multiple disk failure on RAID-5.I have the document to recover data from RAID -5 incase of Multiple disk failure but the document is not for FAStT Family.
Thanx in advance to Storage devices Guru's
Regards
Arvind shrivastava