Changing out M200 Series to Nortel 3903 & 3904 2

[PCDoctor68]

Hello, I am kinda stuck without programming as when I said I would do this job it was told to me I would only be physically installing jacks and setting phones on desk.
Now I am expected to program them also. Is this a big chore?
Is there step by step programming somewhere? As it has been a few years since programming the OPTION?

 

[hawks]

First of all make sure that they have the software level to support the new phones. What RLS 3900 sets are they putting in 1/2/or 3?

 

[johnpoole]

there is not a step by step that i have ran across. ld 11 prt the old set and build the new on the same tn, then swap the set. i would start on the phone next to the term, make sure you get the step be step down..

john poole
bellsouth business
columbia,sc

 

[PCDoctor68]

Ok a few more details.....
Option 61C with Succession 3.0
I am green on this switch so please log in instructions, should I print all the existing sets, then out them???
Then build new 3903 and 3904's??

 

[johnpoole]

yes and the log in information is unique for each switch. you need the password from the user or vendor. and yes you print the old set remove it and build a new set. if you've never programed a merridian, it's a tall order.. here's a 3904 for a guide

REQ: prt
TYPE: tnb
TN   56 0 14 14
DATE
PAGE
DES

DES  SWITCH
TN   056 0 14 14
TYPE 3904
CDEN 8D
CTYP XDLC
CUST 0
FDN  3301
TGAR 4
LDN  NO
NCOS 7
SGRP 0
RNPG 99
SCI  0
SSU
LNRS 16
XLST
SCPW
CLS  UNR FBD WTA LPR PUA MTA FNA HTA TDD HFA GRLD CRPD STSA
     MWA LMPN RMMD SMWD AAD IMD XHD IRA NID OLD VCE DRG1
     POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
     CFTD SFD MRD DDV CNID CDCD MSID DAPA BFED RCBD
     ICDD CDMD LLCN MCTA CLBD AUTU
     GPUA DPUD DNDA CFXA ARHA FITA CLTD ASCD
     CPFA CPTA ABDD CFHD FICA NAID RNGI AGRD MOAD AHD
     DDGA NAMA
     DRDD EXR0
     USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN

CPND_LANG ENG
RCO  1
HUNT 3301
LHK  2
LPK  10
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY  00 MCR 4940 5     MARP
        CPND
          NAME Switchroom John
          XPLN 15
          DISPLAY_FMT FIRST,LAST
     01 MCR 4940 5
        CPND
          NAME Switchroom John
          XPLN 15
          DISPLAY_FMT FIRST,LAST
     02 MCR 4940 5
        CPND
          NAME Switchroom John
          XPLN 15
          DISPLAY_FMT FIRST,LAST
     03 TRC
     04 SCC 0080
     05 SCN 5443 0
        CPND
          NAME test analog
          XPLN 27
          DISPLAY_FMT FIRST,LAST
     06
     07
     08 MIK
     09 MCK
     10
     11 ADL 24  96984207
     12
     13
     14
     15
     16 MWK 3301
     17 TRN
     18 AO6
     19 CFW 16  3301
     20 RGA
     21 PRK
     22 RNP
     23
     24 PRS
     25
     26 CPN
     27 CLT
     28 RLT
     29
     30
     31
DATE 10 OCT 2005

most of that information you will see when you prt the 2000 series phone

john poole
bellsouth business
columbia,sc

 

[PCDoctor68]

Wow! Thank you very much, I have programmed many switches, but this is not one. I guess I will be scrambling for a manual, lol. Just to know what each code means.
Where do I get one?

 

[T1PSTN]

Check out:

http://www.winnmug.org/introverlay/INTROVERLAY.pdf

Download it for lots of info on CLS options and the like.

--T1PSTN

 

[johnpoole]

google for merridial+merl, that's a downloadable file with all the nortel manuals.. you need software input/output guide book one of three, ld 11

john poole
bellsouth business
columbia,sc

 

[PCDoctor68]

Hey John, was that a typo maybe? I have searched all engines for merridial+merl and get null.
Thanx, Al

 

[PCDoctor68]

One more question also... I have multiple buildings and need to make sure the I.D. sent from a phone is that of the primary Line #. No matter which line that phone calls from.
That way 911 works to that phone.
Any suggestions?
I really appreciate the help here, and I will continue to help others here as I learn more of this switch!!

 

[T1PSTN]

To check it:

LD 21
PRT
CLID


To change it:

LD 15

REQ: CHG
TYPE: NET
TYPE NET_DATA
CUST 0
OPT
AC2
FNP
CLID yes <== Answer yes to open the gate
SIZE
INTL
ENTRY 0 <== Entry number
HNTN 800 <=== NPA
ESA_HLCL
ESA_INHN
ESA_APDN
HLCL 3253535<=== NXX or NXX+DN
DIDN (YES)/NO <=== DN appended to CLID sent? Answer NO
HLOC
LSC
CLASS_FMT
ENTRY 0 SAVED!

This will send a CLID of 8003253535 for any calls originating from DNs associated with CLID entry 0.

The DN is associated with CLID entry 0 when you assign it to a key on a telephone.

KEY 0 SCR 4500 0<==Clid table entry number

The default (if you enter nothing) is 0. Therefore, set CLID entry 0 to satisfy the 911 needs of most of your users when prrogramming extension keys.

--T1PSTN

 

[PCDoctor68]

Uh oh, I guess I was not clear enough.
It is for law enforcement. Kinda. Each room, say investigator Joe Smiths office has 3 dn appearing on his phone. I want 5600,5601, and 5602 to show up on caller id as 5600. Is this possible?

 

[T1PSTN]

Yes, it's possible.

LD 11 set programming...

KEY 0 SCR 5600 1
KEY 1 SCR 5601 1
KEY 2 SCR 5602 1

LD 15, NET_DATA...

CLID ENTRY 1
HNTN = 214 <== Your NPA
HLCL = 3335600 <== Your NXX+ the DN

All DNs that are programmed with CLID entry 1 will cause the switch to send 214-333-5600 as CLID.

--T1PSTN

 

[T1PSTN]

I'm sorry, did you mean set-to-set calls within the same switch?

--T1PSTN

 

[PCDoctor68]

they have spent thousands of dollars on 911 software that sends there dn out over cid. But only the main extension of that office i.e., 5600 has room location information sent.
so that is why i want 5601 etc. to send 5600 information.

 

[johnpoole]

do you want to send the dept dn on the did?

john poole
bellsouth business
columbia,sc

 

[chippowell9]

By the way, I think johnpoole meant Meridian + MERL. MERL is Meridian Electronic Reference Library, or something like that. Good luck!