Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Changing of LTO1 to LTO2

Status
Not open for further replies.

rolman

Vendor
Jul 2, 2002
57
SG
Hi all, need urgent advices.

My Customer has NetBackup DataCenter ver 4.5 running on the Win2000 Server with Exchange. And have LTO1 tape Device attached.

But recently my customer has purchase the LTO2 DELL PV110T.
I have changed the device but the netbackup won't work.

Pls advice must I reinstall the driver for the LTO2 Tape Deivce. I have downloaded from VERITAS Website the driver, which for CERTANCE LTO2. I'm not sure whether it will work.

Plzzz advice.

Million of thanks
Rolman
 
You will probably have to go through the Configure Storage Devices Wizard in Veritas. If you have already done that I would try the manufactures drivers.
 
Hi YouEnjoyMyself, thx for your advice. Really appericate it.

I will use the manufacturer drivers and go through the Configure Storage Devices Wizard.

Thanks you. :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top