Changing IP Address Server Edition

[richa164]

Hello ...

its possible to change the IP Address of the IP Office Server Edition Using IPO Server Manager Mode ?
The Customer need to change the IP Address of the Network and I Know its not possible to start the ignotiation process.

Thanks in Advance

 

[derfloh]

You should give more information about your environment...

 

[tlpeter]

Yes you can if it is a hardware virtual server and you can do this from

https://xxx.xxx.xxx.xxx:7071

-> settings.
If you have a virtual server edition then your hardware ID will change and your licenses will go invalid.
You will need to swap those licenses.


BAZINGA!

I'm not insane, my mother had me tested!

 

[richa164]

Hi telpeter ...

Then, The Best is to re-install the SE again.
ok, if I just connect the LAN1 from the SE and Expansion, Can I use the LAN2 port from SE and WAN port (LAN2) from Expansion to start the ignotiation process again, and connect these ports to the customer switch (already disconnect the LAN1 ports from switch)

Thanks in Advance

 

[richa164]

Thank you