Changing from 2112 to a 2616

[vicentealeman]

Hi:
I have one user with a 2112 and I want to give him a 2116; do I just need to plug in then new phone? or do I have to do some kind of programming; also, How could I do to program my PBX (SL-1) to allow users with 2116 phones with display to see the caller ID (currently they can only see the extension # but not the outside call #)
Thanks

 

[johnpoole]

yes you'll need to take the 16 out and reprogram the 16, do you have access to command line, each phone will need to be changed (cls) to allow name display

john poole
bellsouth business
columbia,sc

 

[vicentealeman]

Thanks John, but could you give me some instructions on how to do this? What do you mean to have access to comand line?; Yes I do have access to the PBX using the terminal if that's what you mean
Thanks again

 

[johnpoole]

ld 20

PT0000
REQ: prt
TYPE: 2216
TN 64 0 14 14.. tn of 2216..


PT0000
REQ: out
TYPE: 2216
TN 64 0 14 14



PT0000
REQ: new
TYPE: 2616
TN 64 0 14 14
cust 0
the ncos and tgar rngp etc will all the be the same for both sets.. in class just type in add and all acla marks that end in a.. when you get to key enter 0 scr xxxx from the old set and repeat for each key.. you might want to build the new set on a vacant tn 1st just to make sure, then out the old and do a mov.. ld 20...mov 2616 ,,



john poole
bellsouth business
columbia,sc