Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Changing DNS on MAS Servers

Status
Not open for further replies.

wpetilli

Technical User
May 17, 2011
1,877
US
My DNS server IP's in my environment have recently changed. My MAS Servers are statically assigned so they will need to be manually updated. Does that require a reboot after that change or should it be a simple change?
 
Reboot...we did the same thing and our BP said we should make the change after hours and reboot to avoid any connectivity issues.
 
I have to update the same on the MSS and MN as well. Any specific order or are they independent of one another. My plan is to do the MN, MSS and then MAS Servers and then reboot.
 
Noting that we have Exchange back-end, so that's what I meant about avoiding connectivity issues.
 
A reboot should be done but i would do MSS wait for it to come back up and then do the other 2 in any order.



Ken Means

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
 
Just trying to be super sure with this one.. There's nowhere else in the MAS Servers I need to worry about? I'm basically changing the DNS IP's of the NIC card to the 2 new ones and wasn't sure if there are other areas in the server that would also need updating. The only thing in the environment changing are the DNS IP's.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top