Changing dial plan, G3r11

[grayml]

Hello,

My dialplan currently has 9 set as an extension, length 4 digits. I need to break it out so that:
90, 4 digits, extension
91-96 as above.
97 4 digits aar.

It won't take as the message is that "A single digit entry is already on screen with the same first digit."

So when I try to delete the 9 I get a message something to effect that I will have to remove all objects with a 9 first digit.

Is there any way to break out the dial plan without removing every extension and starting over on the dial plan?

Thanks

 

[fataldata]

Do you have an aar access code?

If so then you would just put the 97xx in aar analysis, unless you are looking for a way to not dial the aar access code. Then you will need to create Uniform-dialplan extensions in the 97xx and there reference aar in the net field. I don't think you need to change your dialplan analysis, just leave 9xxx as extensions and put the 97xx ones in Uniform-Dialplan.

 

[grayml]

Thanks for the reply.

No aar access code.

I did the UDP change and that worked. Thanks again.