Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Changing CPPM CoRes out to CPDC CoRes

Status
Not open for further replies.

KCFLHRC

Technical User
Aug 16, 2011
6,082
US
Has anyone made this change? Will the licensing for the CPPM work with a CPDC? I know the CPDC will not do VxWorks but this would be a simple change out of the card and reloading the Linux etc.
 
Hi can anyone let me know about the difference between co-residence server and stand alone server?
 
The Coresident has the Call Server and Signal Server deployed on the same server running Linux with a hard drive. The stand alone boxes run VxWorks on one card and Signal server on another.
 
I would say not as the keycode you have will be for a callserver type 4021 (CPPM Callserver) or a 4121 (CPPM Co-Res) whereas what you want is a 4221 (CPDC Co-Res)
 
Both systems would be CoRes, the from and to. Just changing card from CPPM to CPDC
 
but like i say the card type gets a mention in the key code and they are different

CPPM - 4121
CPDC - 4221

Example:

.ksho rec
Validating Keycode File /p/install/keycode.rec ... OK

System Parameters:
System Serial Number : 123456789
Software Version : 4021
System Type : CS 1000E
Call Processor : CP PM
Release : 5
Issue : 0_
 
Thanks bignose21, kinda what I was thinking but wasn't sure.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top