I have a OPT81C that I need to change a card in. I am wanting to replace a analog line card with a universal trunk card. The analog card does not have any tns programmed on it. Is this some thing that can be done fairly easy. If so can someone give me some direction for how to go about doing this. I have enabled and disabled cards but have never actually replaced one witha a different type.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
changing cards
- Thread starter grnichol
- Start date
Johnthephoneguy
Technical User
Replacing an analog card with a UTC won't be a problem. Disable your analog, remove it, and then put the new card in.
I would verify no jumpers on your MDF first for those TN's though.
JohnThePhoneGuy
"If I can't fix it, it's not broke!
I would verify no jumpers on your MDF first for those TN's though.
JohnThePhoneGuy
"If I can't fix it, it's not broke!
you may want to add cardslt, then disble.. since the card has no stations programed, it may not allow disc.. there is not a card map (rolm) so programing the 1st tn on the trunk card does the build
john poole
bellsouth business
columbia,sc
john poole
bellsouth business
columbia,sc
- Status
Similar threads
- Locked
- Question
