hi there,
I am having trouble running some CD-R/RW software (B's Recorder Gold5) and get the message:
"Stop:0x000000D1 (0x000000DB, 0x00000012, 0x00000000, 0xEB4571787)
Driver_IRQL_not_les_or_equal"
I assume it is a IRQ problem:
IRQ Assignment
14 Primary IDE Channel
14 SCSI/RAID Host Controller
15 Secondary IDE Channel
15 SCSI/RAID Host Controller
System Information report written at: 10/12/2002 10:22:38 AM
[Problem Devices]
Device PNP Device ID Error Code
Primary IDE Channel PCIIDE\IDECHANNEL\4&CB9060A&0&0 32
Secondary IDE Channel PCIIDE\IDECHANNEL\4&CB9060A&0&1 32
Primary IDE - Master HD
Primarmy IDE Slave-NONE
Secondary IDE - Master CD-R/RW
Secondary IDE - Slave CD-ROM
I am trying to switch the IRQ's of the IDE's to 3 and 4 (open ones). How do I do that?
Thanks!
Marc
Guinea pigs make the world a nicer place!
Piggydad30@hotmail.com
I am having trouble running some CD-R/RW software (B's Recorder Gold5) and get the message:
"Stop:0x000000D1 (0x000000DB, 0x00000012, 0x00000000, 0xEB4571787)
Driver_IRQL_not_les_or_equal"
I assume it is a IRQ problem:
IRQ Assignment
14 Primary IDE Channel
14 SCSI/RAID Host Controller
15 Secondary IDE Channel
15 SCSI/RAID Host Controller
System Information report written at: 10/12/2002 10:22:38 AM
[Problem Devices]
Device PNP Device ID Error Code
Primary IDE Channel PCIIDE\IDECHANNEL\4&CB9060A&0&0 32
Secondary IDE Channel PCIIDE\IDECHANNEL\4&CB9060A&0&1 32
Primary IDE - Master HD
Primarmy IDE Slave-NONE
Secondary IDE - Master CD-R/RW
Secondary IDE - Slave CD-ROM
I am trying to switch the IRQ's of the IDE's to 3 and 4 (open ones). How do I do that?
Thanks!
Marc
Guinea pigs make the world a nicer place!
Piggydad30@hotmail.com