Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Changin analog circuit packs

Status
Not open for further replies.

rtetryyt

MIS
Feb 14, 2008
117
0
0
US
I got a new 24 port analog card to change out with my old 8 port. In the past I tried just installing the new card, but it wouldn't work. I remember the Avaya tech telling me I had to change board or change something to get it to work. Can someone tell me the command? Thanks Travis
 
Travis you should be able to remove the translation off the old board (no stations assigned to it) and place the new one in its slot. I have done this by "X" porting the numbers that were assigned to those ports. Then adding them back when I put the new board in.

If this does get hosed up (but it shouldn't) you can use the "ch cir" command.

When is the last time you helped someone, just because you were able to?

For the best response to a question, read faq690-6594


 
Keep in mind, the 24 port pack is wired different so you'll need to put in different port numbers than the ones you took out when you changed the ports to X.

Old port New
CCccss01 CCccss01
CCccss02 CCccss04
CCccss03 CCccss07
CCccss04 CCccss10
CCccss05 CCccss13
CCccss06 CCccss16
CCccss07 CCccss19
CCccss08 CCccss22

-CL
 
just changing out a board without removing the translations will cause a board type conflict on change circuit-pack and list configuration board / all

you will have to have "u" on all the ports when you use change circuit-pack to change the board type. If tti / psa is on and you have "t" or "p" on the ports, you will have to turn tti off.

Also "list marked-ports" to see if you have marked ports, as they will show up as "u" and are considered to be programmed ports. "clear port xxxxxx" will remove a marked-port from the list.

The board cannot be deleted using change circuit-pack if it is plugged in. When you unplug it and all translations are removed, it should go away.

To add to lopes1211 I will include 16 port also in a table below:

Code:
Pair    8       16      24
Color   port    port    port
----    ----    ----    ----
w-bl    T1      T1      T1
bl-w    R1      R1      R1
w-o             T2      T2
o-w             R2      R2
w-g             T3      T3
g-w             R3      R3
w-br    T2      T4      T4
br-w    R2      R4      R4
w-s                     T5
s-w                     R5
r-bl                    T6
bl-r                    R6
r-o     T3              T7
o-r     R3              R7
r-g                     T8
g-r                     R8
r-br            T5      T9
br-r            R5      R9
r-s     T4      T6      T10
s-s     R4      R6      R10
bk-bl           T7      T11
bl-bk           R7      R11
bk-o            T8      T12
o-bk            R8      R12
bk-g    T5      T9      T13
g-bk    R5      R9      R13
bk-br           T10     T14
br-bk           R10     R14
bk-s            T11     T15
s-bk            R11     R15
y-bl    T6      T12     T16
bl-y    R6      R12     R16
y-o                     T17
o-y                     R17
y-g                     T18
g-y                     R18
y-br    T7              T19
br-y    R7              R19
y-s                     T20
s-y                     R20
v-bl            T13     T21
bl-v            R13     R21
v-o     T8      T14     T22
o-v     R8      R14     R22
v-g             T15     T23
g-v             R15     R23
v-br            T16     T24
br-v            R16     R24
v-s
s-v

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

36 years Bell, AT&T, Lucent, Avaya
Tier 3 for 26 years and counting
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top