changes in the start up file

[NORTELCS]

how can i access the startup file from PDT.

thanks.

 

[GHTROUT]

Did you try to change directories and/or list the files? Just get the one you want and edit away.




~~~
GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies

 

[NORTELCS]

no i am trying to locate the file startup and type command in the file but i don't know how how type the command in the file

this is wat i am trying to type


1 Locate the start up file named /p/startup
2 Type the following command the file at the end (where nnn = the
payload type value)
setRFC2833PT 102 <enter>

 

[GHTROUT]

You could use X-Modem to download, then edit on your local PC, then upload. I would also be cautious about using Windows Notepad - I use Ultra-Edit

It might also be worth seeing if anyone else has a comment on that before trying it. I don't know all the things that could go wrong.






~~~
GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies

 

[Avaya911PLM]

That post has little red marks from a 10' pole all over it.

--
Fletch

Nortel Emergency Services PLM

http://nortel.com/e911

Don't forget about the FREE E911 Webinar Oct. 30th!
Register online at

http://thevoicereport.com/E911

 

[GHTROUT]

If someone knows what they want, it's their system to wreck.





~~~
GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies

 

[NORTELCS]

hi

these steps were mentioned in Nortel NTPS to change the payload value of RFC2833 for DTMF on SIP trunk to be compateple wiht CCM.

the problem if i cahnge it from the PDT by using setRFC2833 it will work but after i reboot the system it will go the default payload.

these steps as per Nortel NTPs

1 Locate the start up file named /p/startup
2 Type the following command the file at the end (where nnn = the
payload type value)
setRFC2833PT 102 <enter>
3 INI (or coldstart) the Call Server.
4 During INI, press CTRL+B when prompted, then press c to change
the parameters. Press <enter> until the start up scripts prompt
displays.
5 Type /p/startup <enter>. Continue to press <enter> until the end.
6 Press @ <enter> to continue to reboot.

thanks.

 

[Avaya911PLM]

What NTP was that? I was unable to find it on a search.

--
Fletch

Nortel Emergency Services PLM

http://nortel.com/e911

Don't forget about the FREE E911 Webinar Oct. 30th!
Register online at

http://thevoicereport.com/E911

 

[NORTELCS]

hi

it is NN43001-115_01.01_CSNewRel5

 

[GHTROUT]

Yes, those instructions as posted are certainly in that book:

http://www142.nortelnetworks.com/techdocs/CS1K_5_0/pdf/NN43001-115_01.02_CSNewRel5.pdf

Plus the book has some grammatical errors that make the instructions hard to follow.






~~~
GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies

 

[NORTELCS]

any help