Changed Password-Now I can't log in... 1

[nlhtech]

The intent was to change PW01 and add a username "BDE"
This is what I did,now I can't log in. Any suggestions?

>ld 17
CFN000
MEM AVAIL: (U/P): 11062699 USED U P: 320401 69315 TOT: 11452415
DISK SPACE NEEDED: 123 KBYTES
2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO)
DCH AVAIL: 253 USED: 2 TOT: 255
AML AVAIL: 16 USED: 0 TOT: 16
REQ chg
TYPE pwd
PWD2
LNAME_OPTION yes
FPC no
NPW1
LOGIN_NAME BDE
NPW2
LOGIN_NAME
LAPW
FLTH
LOCK
AUDT
INIT

 

[bigindian65]

using CAPs?

Mato' Was'aka

 

[nlhtech]

The username was to be CAPS the password wasn't.

 

[GHTROUT]

You wanted to add an LAPW, but you deleted Name ADMIN1 instead. The best thing, which you may have done, is to LD 22 REQ PRT TYPE PWD, so you can see all the LAPWs and logons first.

However, as posted, I would think CAPS might be your ticket.

Hopefully, you still know PWD2, so just print the PWDs

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[GHTROUT]

You might also want to set these:

FLTH (number of failed passwords before lockout)
LOCK (minutes of lockout)


I typically suggest:

FLTH 3
LOCK 1

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[nlhtech]

I CAN'T GET BACK IN WITH PWD2. I GET OVL428 LOGIN NAME AND PASSWORD COMBINATION IS INVALID.

 

[telebub]

Try the user name "admin2" with the current PWD2 password.

War Eagle!
Lions Baseball '09!

 

[nlhtech]

Thanks! Saved again by Tek-Tips.Much appreciated!!