change vpn password 2

[nash99]

I need to quickly change the vpn password for my company.

I have a Tunnel-group GLOBAL and a Group-policy GLOBAL

which one do I make the change on. I know normally it would be vpn-group GLOBAL password xxxxxx.

 

[nash99]

Here is a cut out of my current settings.



tunnel-group XXXX-global type ipsec-ra
tunnel-group XXXX-global general-attributes
address-pool vpn_pool_admin
authentication-server-group (outside) none
default-group-policy XXXX-global
tunnel-group XXXX-global


group-policy XXXX-global internal
group-policy XXXX-global attributes
dns-server value xxx.xxx.xxx.xx
vpn-idle-timeout 30
split-tunnel-policy tunnelspecified
split-tunnel-network-list value acl_vpn

 

[NetworkGhost]

Do you have ipsec-attributes defined for your tunnel group?

http://www.wr-mem.com

 

[nash99]

tunnel-group xxxx-global type ipsec-ra
tunnel-group xxxx-global general-attributes
address-pool vpn_pool_admin
authentication-server-group (outside) none
default-group-policy xxxx-global
tunnel-group xxxx-global ipsec-attributes
pre-shared-key

 

[NetworkGhost]

Change your preshare key. That is used as the group password.

http://www.wr-mem.com

 

[nash99]

can you tell me what the syntax is please?

 

[NetworkGhost]

tunnel-group xxxx-global ipsec-attributes
pre-shared-key supersecretkey

http://www.wr-mem.com

 

[nash99]

thank you.

 

[nash99]

it did not work. I can still get in with the old vpn password? I entered the first command under the config T (enter), followed by the 2nd command (enter).

 

[NetworkGhost]

sorry. take out the old key first.

conf t
tunnel-group xxxx-global ipsec-attributes
no pre-shared-key
pre-shared-key supersecretkey
exit
wr mem

http://www.wr-mem.com

 

[nash99]

It worked. thank you... thank you.

 

[NetworkGhost]

No problem.

http://www.wr-mem.com