Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Change time on system
- Thread starter rsunra
- Start date
If the time server is set to 0.0.0.0 the IP Office will be receiving time from the Voicemail sever, or Manager application upon reboot.
If you have a NTP server eg: A Windows 2000 domain controller you can set the IP address as this PC.
If you want to change the time, adjust the time on the VM server and reboot the IPO, or await the hourly update.
You also have the option of creating a with System Phone rights which allow a additional option on a 2030 or 2050 display which allows you to change the date and time on the fly
hope this helps
If you have a NTP server eg: A Windows 2000 domain controller you can set the IP address as this PC.
If you want to change the time, adjust the time on the VM server and reboot the IPO, or await the hourly update.
You also have the option of creating a with System Phone rights which allow a additional option on a 2030 or 2050 display which allows you to change the date and time on the fly
hope this helps
HeinzBaumann
Technical User
I have the same problem.
I have a IP Office 403 with 64xx Telefone.
I have a sandelone pc with NTP Server but the IP Office change the Time and Date not.
?????
I have a IP Office 403 with 64xx Telefone.
I have a sandelone pc with NTP Server but the IP Office change the Time and Date not.
?????
- Status
Similar threads
- Question
