jortizoconnor
IS-IT--Management
How do i change the DN [ext] of a newley created phone. I used the DN '5555' to when copying from a another TN. The phone type is a 2006.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Change the DN??
- Thread starter jortizoconnor
- Start date
- Status
- Thread starter
- #3
jortizoconnor
IS-IT--Management
I AM HAVING A BIT OF TROUBLE....I am assuming that in your code 'item key 00 scr xxxx" I am suppose to put the 5555 inplace of your xxxx, or do I put the new DN? Well when I did the 5555 [existing DN] i got the following below. What is the next step?
//
REQ: CHG
TYPE: 2006
TN 28 0 13 5
ECHG YES
ITEM KEY 00 SCR 5555
HNT FNA
MARP
CPND
VMB
KEY
//
//
REQ: CHG
TYPE: 2006
TN 28 0 13 5
ECHG YES
ITEM KEY 00 SCR 5555
HNT FNA
MARP
CPND
VMB
KEY
//
McGruff753
MIS
You should have been able to create the new DN in the copy mode. Not sure why you are changing it unless it is the rollover DN on Key 1. Yes, the xxxx is where you would put the new DN.
acewarlock
Technical User
Print the TNB and post it here. But as McGruff753 said why didn't you just put the new DN in when you did the copy.
- Thread starter
- #6
jortizoconnor
IS-IT--Management
reason, I was waiting for a paticular dn to be freed up!
thanks, i'll try your suggestion
****
thanks, i'll try your suggestion
****
- Status
Similar threads
