Change system from Mu-Law to A-law

[NORTELCS]

please can you guys provide we with with the steps how can i change system form Mu-Law to A-Law including changes in

LD 17

ATRN
PARM

thanks.

 

[acewarlock]

You will also need the correct Cards in the system.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[stokerel]

in ld 17 - parm - set PCML to A

if you use a PRI card, you must define each channel in ld 14 with PCML set to A as well.

Hope this helps, correct me if I'm wrong guys.
Radu.

 

[marc3lo]

LD 17
Change in ATRN the promp CODE to 2
Change in PARM PCML to A

LD 97
Change in XCTP DTMF to the tone value use were you are installing the system

Change in SYSP INTL to yes.

Also depend were you are installing you could need to add a new FTC table to be use in the customer an digital trunks so the tones the PBX generate are recognize to Telco.

 

[NORTELCS]

thanks guys

 

[phones1]

Once complete EDD & a full system reboot!!!

Remember if it doesn't work hit it harder

Scott UK

 

[acewarlock]

NORTELCS: "You said Thanks Guys", Does that mean it is working now?




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[NORTELCS]

yes it is working fine