Change station location

[walruses]

Hi everyone, I have a station working on locaction 1 when it must be working on location 30, does anybody know how to make it work on location 30?

Thank you in advance.

 

[jtc22]

In the change-station form page 1 Location, tou can set it to 30 the default is blank.

 

[coolwhisper]

Jct22's post is spot on if you are on newer CM and You are talking about an h.323 phone. We have a 5.2 CM and the change needs to be made ip-network-map. You will probably need break out the address range unless you want to move all the phones in that subnet. If it is a SIP phone it needs to be done under Location in System Manager.

 

[walruses]

Excellent!! Both replies really help me!!

Thank you very much.

 

[dialtonebone]

It would ideally be done through the "ip-network-map" if this wasn't a one off scenario. If this is being done at a station level be sure you understand the consequences (routing wise).