Change ring group on Call Pilot 150

[jcokonougher]

I need to change the way this phone system currently rings. How do you make all lines ring when a call comes in to the main line?

 

[norstarboy125]

what happens now? do lines just flash, does the aa pick right up. give more detail

 

[RikRodgers]

Norstarboy125's right. You probably need to program the attendant's extension to ring under Terminals&Sets, but if your calls are being answered by the Call Pilot first, then you'd have to go into f983,AA,Table#,Attendant to set that phone as the attendant.

 

[jcokonougher]

Thanks fro the response. I will have to go back out to the site to see exactly what the phones are doing.

 

[RikRodgers]

If the Call pilot is not answering all calls at 2 or fewer rings, then get into F**config. Show on Terminals &Sets, and enter the extension to change. Press Show to Line access/line assignment. Scan through and change Appear only to Appear&Ring for each line. Repeat for each set you want to ring.

 

[jcokonougher]

Thanks for the help.