Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Change Portable to Wired Extension

Status
Not open for further replies.

BobHLiton

IS-IT--Management
Aug 18, 2021
72
US
Hi, My mind must be stuck on the weekend because I've gone brain dead working on this NS700 today (Friday).

I want to change a Portable station (currently set to forward to an outside line) to be a Wired Extension, specifically an analog line.

My thinking is I want to first delete it from PBX Configuration > Extension > Portable Station > Extension Settings. But I can't find the delete button. It's like another admin is logged in and it's not showing me the icons to add, edit, delete options in the lower left of the Main tab. I just have a refresh and copy icon.

Am I in the wrong area of the GUI?

I'm logged in as Installer.

Please, any advice welcome.

Cheers,
-Bob

 
OK, the fog has lifted.

To delete IP phone extension, do that under PBX Configuration > Slot > (hover over IP Phone) > IP-PT
To analog delete extension, do that under PBX Configuration > Slot > (hover over analog card graphic) > Port Property


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top