Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Change of T1 transport causing Frame Slip Errors

Status
Not open for further replies.

Alfordap

Systems Engineer
Oct 22, 2019
25
US
We recently moved two T1's from Ciena 3500 Sonet to Ciena 3932 TDM over Packet for transport between two CS1000 PBXs. Moving these T1's has caused frame slip errors DTA017 at a rate of 3-5 per hour. We think it has something to do with the clocking on the 3932 switch interrupting or corrupting the timing from the PBXs . Does anyone have an experience with the Ciena 3932 transporting T1s?
 
not with that brand specifically, but you need to ensure one Ciena is set for the Network Side and the other Ciena is the User side. It's a Master/Slave configuration. Both sides cannot be the network side or the user side.

John Anaya
Amdocs Inc.
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top