Change Idle_set_display

[detota3]

REQ chg
TYPE parm
LPIB
HPIB
500B
SL1B
DTIB
OB
NCR
MGCR
NCPU
CFWS
CML
ALRM
ERRM
DTRB
ABCD
K R
FCDR
PCDR
TPO
TSO
CLID
DUR5
MLDN
MARP
IPIE
FRPT
DCUS
MSCL
PMSI
NDIS
OCAC
MTRO
SBA_ADM_INS
SBA_USER
BCAP
IDLE_SET_DISPLAY 123 Test
ICON
MSEC
MSSD
NKEY
TKEY

the "MODIFY" perameter that is supposed to appear after IDLE_SET_DISPLAY does not show up. What am i doing wrong?

thanks,
Nick

 

[dabble]

What release are you on? You can change the idle set display via element manager.

 

[detota3]

i have a 5.0, not familiar with element manager?

 

[KCFLHRC]

You have to be logged in as Admin 2 to do this.

 

[detota3]

yes i know, it lets me string all the way down to where it says "IDLE_SET_DISPLAY" but never shows "MODIFY." It's like i am almost there but not.

 

[KCFLHRC]

I'm guessing it's a licensing issue. Certain releases you had to buy that option. Print your SLT's in LD 22 and see if something jumps out at you. Other than that I have no idea if you are using the admin2 user.