Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Change Idle_set_display

Status
Not open for further replies.

detota3

Technical User
Jun 16, 2010
62
US
REQ chg
TYPE parm
LPIB
HPIB
500B
SL1B
DTIB
OB
NCR
MGCR
NCPU
CFWS
CML
ALRM
ERRM
DTRB
ABCD
K R
FCDR
PCDR
TPO
TSO
CLID
DUR5
MLDN
MARP
IPIE
FRPT
DCUS
MSCL
PMSI
NDIS
OCAC
MTRO
SBA_ADM_INS
SBA_USER
BCAP
IDLE_SET_DISPLAY 123 Test
ICON
MSEC
MSSD
NKEY
TKEY

the "MODIFY" perameter that is supposed to appear after IDLE_SET_DISPLAY does not show up. What am i doing wrong?

thanks,
Nick
 
What release are you on? You can change the idle set display via element manager.
 
i have a 5.0, not familiar with element manager?
 
yes i know, it lets me string all the way down to where it says "IDLE_SET_DISPLAY" but never shows "MODIFY." It's like i am almost there but not.
 
I'm guessing it's a licensing issue. Certain releases you had to buy that option. Print your SLT's in LD 22 and see if something jumps out at you. Other than that I have no idea if you are using the admin2 user.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top