change hdu bc13 tsw

[paoloitaly]

what is the correct procedure to make the change of the disk with bc13tsw?
I have this sequence:
bleqi:equ=1-0-60-0;
fimoe:subfs=syssubfs21;
iosie:node=sysn,iodev=sysdisk2;
change HDU
iosii:node=sysn,iodev=sysdisk2,btype=ata,subfs=syssubfs21;
fimoi:subfs=syssubfs21;
bleqe:equ=1-0-60-0,allfm=yes;
dubdp;
dusyi;
The first command (bleqi) answers "ordered" but does not make the block,
FIMOE can not be executed unless you first run the BLEQI.

I'm sorry for the translation but do not speak English I translated with google

thanks for the help, Paolo

 

[whosrdaddy]

if the system says ordered then you need to wait.
sending ';' at some times will trigger the spontaneous printout. If you want to avoid the "ordered" feedback, you can always do a rfboi first and then relogon (if needed) and then bleqi.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[paoloitaly]

I know the method ( but the sistem does not respond because the channel 1-0-60-0 is not free, I solved with the RFBOI: bipos = 1-0-60 (niu) and another login.
thank You, Paolo