Change External Destination Codes

[anticristo]

Hello all,

I'm trying to change the external destination codes in a MD110 BC12, but trying to set up it can't be done

Actual
EXTERNAL DESTINATION CODE 60 - 63
7 - 9

I want to change to
EXTERNAL DESTINATION CODE 6 - 9


Anyone can help me?

Thanks!

 

[642234]

Dear ,
First delete the external destination from nadap then create again.

nanse:numtyp=ed,numse=60&&63;
nanse:numtyp=ed,numse=7&&9;
Then create again

NANSI:NUMTYP=ED,NUMSE=6&&9;

 

[anticristo]

Thanks!!

 

[Alex1978]

Hi anticristo,
are you italian??
I can help you about somethings of MD110...

Ciao sei italiano!? possiamo scambiarci un contatto diretto se vuoi potrebbe essere utile ad entrambi!!
ciao..
Alex

 

[rfpui]

Hi
Not so quickly

To analyze this problem we need printout of command
NADAP;
RODDPEST=ALL;
And if You use LCR:
LCDDP :TAB=FDT;


Please look to thread806-898504 how to send printout this commands in correct format


----------------------------------
If anything can go wrong, it will.
(Murphy's Law)