Change DDI To Different DN 2

[Vernst]

Hello everybody, first time poster here! Also, Im still getting to grips with Meridian so any help offered would be great.

We are currently using an Option 11c. All of our DDI's go to the corresponding DN e.g. ***634 goes to extension 634.
However, one of our DDI's ***655 is actually going to the DN 812.

Is there anyway I can change the DDI to go to the correct DN?

Any help would be gratefully appreciated.

 

[johnpoole]

the term is did sir, not a problem, ld 49 prt idc, cust 0 and return until it prints.. then with the table number, do a clear translation

REQ  chg
TYPE idc
CUST 0
DCNO 1
IDGT 1962

1962 1962
IDGT

that will send the dn back to it's normal termination

john poole
bellsouth business
columbia,sc

 

[srmega41]

Quick question relating to this:

Can you remove an entry also? I thought you can put an x next to the IDC entry to remove it, but I was wondering if there is a reason to do a clear translation vs. removing the entry.

I do not use IDC's very much, and only have it working on one route.

Sorry for the lame question.

Scott M.

 

[MG2005]

john they say "DDI" in europe haha

 

[johnpoole]

thanks for the knowledge, didn't know that, when i worked over seas it was with an all american crew. did get to play with e1's but never interfaced much with the local switchmen. you can out an entry but it's tricky, i don't remember the steps. i usually wait until i have a dozen or so to out and out the table and put the needed ones back in.

john poole
bellsouth business
columbia,sc

 

[Johnthephoneguy]

You worked overseas during WW2 John, you know things have changed since then!

 

[johnpoole]

ww1, our unit was black and white, we didn't even have color uniforms

john poole
bellsouth business
columbia,sc

 

[Reusser]

To out entry in idc

LD 49
req: chg
type : idc
DCNO: <-- enter the IDC table number
IDGT 1972
1972 x

 

[Vernst]

Thanks very much for your help John. That worked great and has sorted out my problem.

Also, at least I know now that in the US you guys have a different abbreviaton for our DDI!

Cheers once again.

 

[johnpoole]

we're still trying to learn english, mate

john poole
bellsouth business
columbia,sc