Change date/time CS1000

[calmkiller]

I was looking at thread798-1667884 and I am having the same issue.

I login as admin2, load up LD 02 and can show the date and time with no problem. I type stad 06 and hit space and it takes me to a new line with code TFC201. We had the problem last year when we tried to change the d/t with admin1 and it would not work because of permission levels. admin2 has the correct permissions. So what does this TFC201 code mean?

 

[KCFLHRC]

TFC201 says this

TFC0201 The parameter specified is out-of-range.
Action:
Severity: Info. Critical to Monitor: No. SNMP trap: No

 

[bhassell2000]

dont you have to put day first? stad 24 06

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[bignose21]

stad dd mm yyyy hh mm ss

 

[gteabc]

What release are you running? If you are running on a Linux server you need to change the date and time
in the command line.

 

[KCFLHRC]

Set time and date
To print the current time and date: TTAD day-of-week day month year hour minute second
TTAD WED 24 11 1976 15 41 49
To set the time and date: STAD DAY MONTH YEAR HOUR MINUTE SECOND
STAD 24 11 1976 15 41 49

 

[KCFLHRC]

If you are running on a Linux server you need to change the date and time
in the command line. "

This is not true. If a CoRes then you can change the date and time in UCM

 

[calmkiller]

I got it to work after trying a couple more times. Thanks all.