Just installed a multivantage definity. Originally installed with a console for the reception but was too bulky and ugly. Changed this to a 6424 set. My problem is when I try to add station 0 I am getting a already used message. I already removed all the attendants and in console parameters there are no attendants. In the dialplan 0 is 1 digit and extension. There are no cover paths with attd as coverage points. When I do a list extension 0 shows as attendant. When I do list usage extension 0 it shows no data. Any idea what I could be missing. Just want to be able to get reception when I dial 0 internally. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
change attendant type
- Thread starter t3chhelp
- Start date
G van Hamburg
IS-IT--Management
Perhaps the 0 is in the Listed Directory. Do "ch list" and see if it's there.
cu Plan your work............Work your plan
![[afro]](/data/assets/smilies/afro.gif "[afro] [afro]")
cu Plan your work............Work your plan
- Thread starter
- #3
- Status
Similar threads
- Question
- Locked
- Question