Oct 18, 2011 #1 MDTAREQ Technical User Oct 4, 2011 20 AE How to change all serv number for Only analog EXT I have this code EXCACIR=6644,SERV=0002120000; I need to apply it to all analog EXT Only
How to change all serv number for Only analog EXT I have this code EXCACIR=6644,SERV=0002120000; I need to apply it to all analog EXT Only
Oct 19, 2011 #2 rfpup Technical User Dec 1, 2004 334 US 1. exddp:dir=all; 2. copy the result in a text file 3. open the text file in a excel file 4. delete the columns not needed 5. put in a cell EXCAC: and copy to other cells of the columns and play a little bit with the excel file and then export again in text file. This text file can be sent as commands Upvote 0 Downvote
1. exddp:dir=all; 2. copy the result in a text file 3. open the text file in a excel file 4. delete the columns not needed 5. put in a cell EXCAC: and copy to other cells of the columns and play a little bit with the excel file and then export again in text file. This text file can be sent as commands
Oct 19, 2011 Thread starter #3 MDTAREQ Technical User Oct 4, 2011 20 AE how to send text file as command Upvote 0 Downvote
Oct 19, 2011 #4 doktor IS-IT--Management Dec 3, 2003 3,841 DK Use the "send file" part of Hyperterminal, Tera Term or WinFiol - or any terminal program you use to connect to the MD110. ///doktor http://www.kandu.dk/spg153996.aspx Upvote 0 Downvote
Use the "send file" part of Hyperterminal, Tera Term or WinFiol - or any terminal program you use to connect to the MD110. ///doktor http://www.kandu.dk/spg153996.aspx
Oct 19, 2011 Thread starter #5 MDTAREQ Technical User Oct 4, 2011 20 AE Thanx it is working fine Upvote 0 Downvote