Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Change all serv for all analog ext
- Thread starter MDTAREQ
- Start date
IR=6644,SERV=0002120000;1. exddp:dir=all;
2. copy the result in a text file
3. open the text file in a excel file
4. delete the columns not needed
5. put in a cell EXCAC: and copy to other cells of the columns
and play a little bit with the excel file and then export again in text file.
This text file can be sent as commands
2. copy the result in a text file
3. open the text file in a excel file
4. delete the columns not needed
5. put in a cell EXCAC: and copy to other cells of the columns
and play a little bit with the excel file and then export again in text file.
This text file can be sent as commands
- Thread starter
- #3
Use the "send file" part of Hyperterminal, Tera Term or WinFiol - or any terminal program you use to connect to the MD110.
///doktor
///doktor
- Thread starter
- #5
- Status
