Change Aironet BVI to another VLAN

[jjk3]

I have a Cisco Aironet I would like to setup with three VLANs:

VLAN12 – Secure Wireless
VLAN22 – Open Wireless
VLAN300 – Management

All of our Cisco Devices have their management IP’s on VLAN 300 and I would like to have the Aironets on them as well.

I have attempted to set this up and all the trunking looks fine between the Aironet and the switch. The only issue is that I can’t seem to get the BVI onto VLAN 300. The BVI seems to only listen on VLAN 1 even if I assign bridge-group 1 to interface fa0.300 ,which is configured on VLAN 300 w/ encapsulation dot1q 300, and/or changing the native VLAN to 300.

Does anyone have any ideas on how to accomplish this?

Thanks

Joe


---------------------------------------
Joe Keegan - Joe@jjk3.com
SANS GSEC & GCFW
CCSE, CCNA, CCSA & Sun Certified

 

[jjk3]

I just double checked everything and I did miss something. I can get the BVI on VLAN 300 if I set VLAN 300 as native (this automatically changes bridge-group 1 to the subinterface that is trunking VLAN 300).

I had forgot to change the native VLAN on the switch. Once I did that it all worked out fine.

Joe

---------------------------------------
Joe Keegan - Joe@jjk3.com
SANS GSEC & GCFW
CCSE, CCNA, CCSA & Sun Certified