Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

cfw 500 set

Status
Not open for further replies.

1badboy

Technical User
Oct 26, 2006
8
US
I'm trying to forward a 500 tn (broken fax machine) to another 500 tn (working fax machine). When I place the cfw 4 on the 1st tn as a feature (ftr cfw 4) I cannot get the 4 digit number of the second (working) tn to "take". Both tn's are in the same building, same 81C. Is there a cls setting that needs to be enabled? thanks
 
Don't make us guess, Please post the TNB of the phone you want to CFW.
 
oh, THAT tnb

TN 4 1 2 14
DATE
PAGE
DES

DES 1041
TN 004 1 02 14
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 1041 0 MARP
CPND
NAME 24 HOUR FAX
XPLN 11
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT
TGAR 15
LDN NO
NCOS 6
SGRP 0
RNPG 0
XLST
SCI 0
CLS CTD DTN FBD XFA WTA THFD FNA HTD ONS
LPR XRD AGRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 4
DATE 5 FEB 2007
 
so now prt your ffc's and forward the phone... here we use *2 plus the number that we want to forward to..

john poole
bellsouth business
columbia,sc
 
i believe 1badboy was trying to add the actual extension into the cfw fiel...i.e ftr cfw 4 6789, no?

you can't do that, you can do what Johnpoole suggest or make broken fax machine dn into a phantom then you can use ftr dcfw 4 6789, where 6789 would be your working fax machine dn
 
Also in the CLS change FNA to FND as you don't have a HUNT number programmed. Or put the other Fax DN in the HUNT.
 
thanx yy and john p. You have the situation exactly. If the tn is not a phantom is john poole's reccomendation the only way? The folks around here are telling me there is means of forwarding a non-phantom tn in software but they can't remember what it is.
 
thanx ace. if i put the good fax tn in as the hunt will this work as a temp forward?
 
DN not TN and it will be a Forward no answer, so just unplug the bax fax phone line and it will forward after what ever RC0 is set for in the CDB.
 
thanx ace. I believe this is the solution we were looking for. Thanx all.This is my first post. Everyone ROCKS!
 
you don't want HUNT, HUNT is for busy... not Forward no answer.

1st build FTR FDN xxxx, where xxxx is your good fax number
2nd make sure CLS is set to FNA

now anycall going to the bad fax machine after x number of ring cycle (depends on what RCO 0 is set for)will forward no anwer to the working fax.

note: i would change the rco to 1 or 2 and make sure 1 or 2 is set for 1 ring.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top