Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CF on CPMGS question

Status
Not open for further replies.

dogg1

Technical User
Nov 3, 2008
217
US
What is stored on the CF? Readon i ask is we had a failed hard drive and would like to reuse the CF. The CF is currently on a 7.5 CPMGS. I would like to install it on a CPMGS that is 7.65 for the same site. The reason for this is because i cannot access the MGC via command line to perform a joinsecdomain.

Any help would be appreciated.

Thanks!!
 
If you just want to sort out your MGC then reboot it

enter the control-B to stop the boot
enter test menu and alter the boot option to use the Gold CSP image, exit out the menu's and @ to reboot the MGC
enter the control-I when prompted, enter the commands:

diskformat "all"
mgcIPClear
reboot -1

When the card comes up enter the ELAN/MASK/GW and CS IP Address, card reboots again and you should be able to login to the card using default admin2 and the do the joinSecDomain
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top