cellpipe isdn 85

[jeter]

Having problems getting PC Anywhere to connect pass the router. I setup a static map tcp port 5631 and 5632, and a udp port 22. The internal ip is 192.168.1.11, Still no luck. Thanks “Reserve your right to think, for even to think wrongly is better than not to think at all”

Fisher CCNA

 

[LucentGuy]

Try changing TCP port 5632 to UDP. Also try adding TCP port 65301.

Also make sure 192.168.1.11 is the IP of the PC you are trying to reach and not the Pipeline itself.

 

[jeter]

Thanks for the reply. The problem was that the customer had an older version of pcanywhere 7.0 trying to coneect to 9.0 “Reserve your right to think, for even to think wrongly is better than not to think at all”

Fisher CCNA