Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CDROM Problem

Status
Not open for further replies.

doyle71

MIS
Mar 6, 2002
9
0
0
US
Hello,


The error that I recieve when I click on the cdrom drive is (d:\the device is not ready) It was working fine for weeks now all I get is this error. Any help would be greatly appreciated.

Regards
Armadno
 
The last 2 drives I've had those symptoms with have turned out to be bad.
You could try
1> going to control panel and removing and reinstalling the drive.
2> cleaning the drive with a cleaning kit or a compressed air can.

3> putting it in another computer to see if it works there

But if it has been installed for awhile and has been working fine, i would not have a lot of hope for those options.

Also, have you removed or installed any cd related software between the time it last worked and now?
 
This often arises when cdrom you are using is older one with speeds like 12x to 40x and the cds using are written at speeds of 48x and not session closed. we have to wait a while in order to open such cds.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top