CDROM not installed in WindowsME 1

[prpnovaes]

After to install drive DDO-Dinamic Drive Overlay V9.61 to be able to use more than 8Gb of a HD Samsung of 20Gb in a WindowsME machine, the system started to function badly.

When the WindowsME is activated from the HD, the Drive of CDROM is not installed. When boot is made by the incialization disket of the WindowsME in DOS mode, CDROM's drive is installed normally.

Have you got any suggestion of as to adjust the WindowsME inicialization archives to activate the CDROM?

Thanks for your help

 

[Cindy1]

Make sure when you installed the cdrom you put it on the secondary controller or ide 2. You shouldn't have to change the jumpers. When you boot up go into the bios and make sure it sees the secondary master. Then save and exit.

 

[mesich]

Check out the link below on CDROM missing in Windows.

http://www.mesich.com/cdrommissing.html

Good Day!
Mesich

 

[prpnovaes]

Thanks a lot cindy1 and mesich for your help.

 

[mesich]

You are welcome. Glad everything worked out for you.

Best Regards,
Mesich

 

[Cindy1]

That's a cool site Mesich.
You learn alot of good stuff hear and people get back to you quickly, not 3 months later when your onto another dilema.
Cindy

 

[mesich]

Hi Cindy1,

Thank you for the kind words.

Yes this is a very good and informative site. I have not participated much here but plan on frequenting more often.

Best wishes,

Mesich