CDR / SMDR question

[VasiliyP]

Hi,

I've got these manuals: 553-3001-350, and 553-2631-100 and one more. I read them. I've got dump from serial port of Option 11. If I follow manual, my parser won't understand feed i'm getting. If I will follow feed - I don't know what I will end up with. Here is sample:

N 095 00 T001019 T010021 08/07 01:40 00:00:02 A 414519999999999
& 0000 0000
N 096 00 A001021 T010024 08/07 01:41 00:00:10 A 414519999999999
& 0000 0000 157XXXXXXXXXXXXX


As you can see, this should be a new style record, because there is second line starting with &. But according to manual, new style record should have three lines, not two. and also it should have start time of the call in format hh:mm:ss.s, but I've got hh:mm.

There are two possible situations:
1. I've got some kind of third format - is there a manual for it?
2. PBX wasn't configured properly to send correct CDR records. All I know port was configured at 1200bps,8-N-1.

Does anyone know where is my problem?

Thank you.

 

[lexer]

You can program your billing software to dismiss the second line

 

[hawks]

I think the New is actually 3 lines and Old is 2 for RLS 25 and earlier. Depending on the level of software You can change the format in LD 17.

 

[VasiliyP]

the problem is, strings I've got are not old or new format. it some kind of third format.

 

[hawks]

It did change with the new CS platform to include something about the IP Phones. Do you have the CD with the new DOCS?

 

[VasiliyP]

no. i have docs which are available at support.nortel.com. Can you let me know what is the name and/or publication number, so I could look it up?

thanks