Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CDR reports for internal calls

Status
Not open for further replies.

MichalPol

Technical User
Oct 26, 2006
20
US
Can someone tell me how to set up on opt.11c CDR for internal calls (station to station).Wright now on CDR reports only incoming and outgoing traffic is visible.
 
Which overlay? I found out in LD 10,11,12 which has nothing common with CDR settings.Can you help me?
Thanks
 
LD 10 for analog or LD 11 for digital stations,
CHG
..
CLS ICDA <--- to allow internal CDR
 
Many thanks for help!~
I thought it must be additional flag to set up in global CDR block :)
 
CLS ICDA is, of course, on a TN by TN basis.

On a side note, does anyone know how to get the phone number of INCOMING calls to display in CDR? The number shows on our phone displays, but not in CDR.
 
Look in the RDB at the INC prombt.

INC (CDR records generated on incoming calls)
 
Also depending what Rls your on, you can do most of your programming in LD 20, insteat of 10, 11, 12, 22
 

NastyNed2

> On a side note, does anyone know how to get the phone
> number of INCOMING calls to display in CDR? The number
> shows on our phone displays, but not in CDR.

Look at CLID prompt in LD17 PARM.
Software package 118 required.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top