Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

cdr on itg3 trunks 1

Status
Not open for further replies.

jasmine31

IS-IT--Management
Jul 25, 2008
15
GB
Hi
Trying to get internal call detailing across a 4 node itg network, all switches are 4.5.
have set cls ICDA on all phones, and we get the internal calls to show on tty 4.
but the call logger does not show calls made across the network.
when i print out the itg routes, cdr=NO but when i go to ld16 and try to change it to cdr=YES, it does not change it
when i prt the route, no sch code generated!
any ideas?
 
When you enter "CDR YES" on the route, it requires additional responses. Essentially, the CDR prompt means "do you want to set all the CDR related values" - if you don't enter any, it assumes none were wanted.

You'll see them right after you enter CDR YES. For example, enter OAL YES and INC YES - that will get you started on records of all outgoing and incoming over that route





GHTROUT.com | FAQs | Recent Replies
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top