CDR not showing outgoing

[swoofter]

I have setup CDR as per previous posts here but I am only getting incoming calls.

This is the CDR_DATA details:
TYPE CDR_DATA
CUST 00
CDR YES
IMPH NO
OMPH NO
AXID YES
TRCR YES
CDPR YES
ECDR NO
BDI NO
OTCR YES
PORT 1 2
CNI DGTS
BCAP NO
CHLN 0
FCAF NO

I am not very experienced in this but from what i have read I thought i just needed to set OAL to yes to see the outgoing records. I have read the nortel docs on cdr but have drawn a blank as it seems I have set it up correctly. Below is the CDR details I have set in the RDB

CDR YES
INC YES
LAST YES
OAL YES
AIA YES
OAN NO
OPD NO

I get all incoming calls just fine but there is no activity recorded for any outgoing calls.

Can anyone point me to where the problem may be?

 

[paidsergrey]

Hi,

This might be a stupid question but have you ensured that CDR is turned on on all your outgoing routes? Do a PRT of your RDB and look for each ACOD and a short way under each should be
CDR YES
The best thing might be to turn CDR on for every route.
This should be all you need.

 

[mluckie1]

Also check TTY 1 and 2 to see if CTY is set.

 

[paidsergrey]

CTY is turned on as swoofter said he was getting the incoming calls.

 

[johnpoole]

like the post said, do you have it turned on for all routes?

john poole
bellsouth business
columbia,sc

 

[acewarlock]

Do you have it turned for your outgoing trunks???

 

[johnpoole]

so today we have an echo, but we're waiting for a response from the user

john poole
bellsouth business
columbia,sc

 

[acewarlock]

Sometime's short answers work better. some people can't handle long sentences.

 

[swoofter]

CDR is set to YES for all routes. I am not in the office so can't print the details. CTY is set on the tty as I am getting inbound calls logged.
AceWarlock asked "Do you have it turned for your outgoing trunks???". Is this the same as the rdb settings or is there another ld that I would set this??

I will post the rdb data tomorrow.

 

[johnpoole]

it needs to be turned on in ld 15 under cdr_data, then the routes, ld 16 chg rdb, and like you posted ld 17 chg tty with cty as user. make and outbound call, trace that to a route, check that route for cdr yes.. and also check the class of the set..

john poole
bellsouth business
columbia,sc