Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CDR Collection for Call Manager Express

Status
Not open for further replies.

themegalord

Technical User
Mar 3, 2006
63
US
Hi!

We have recently setup a CME voice gateway. However, we need to capture call details from the CME. We currently have a Microcall call accounting application. It is possible to use Microcall to capture calls from the CME voice gateway?

Thanks!
 
If microcall is compatible with CME you should be able to. Have you contacted microcall and ask them? They should be able to answer than as well as give you the specific requirements.
 
Hello ,
do some body have an idea about the following pb :

Whe have more than a thousand of IP Phones ,using Extension mobility .
The pb is that for some poeple when they log on the phone introducing UID & PIN , they recieve the "connection established message " but no diplay , and the phone doent work .
So when we make shut /no shut to the interface in the Poe switch (connected to phone) -----> then the phone works
do you have and an explanation .
thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top