Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CDP To BCM

Status
Not open for further replies.

thegenerallee

IS-IT--Management
Apr 7, 2011
137
US
I've done a couple of CDPs out to Option 11 systems but is it possible to do so with BCMs as well?
 
BCM's dont use CDP

Remember if it doesn't work hit it harder

Scott UK
 
With that in mind, how can I go about putting an 8xxx extension (that resides on our main system) on a BCM that we currently have set up?
 
Do you have a PRI tie line between the systems? If so, do you have MCDN setup on the BCM?


 
@telebub: I believe we do. I don't know if MCDN is set up on the BCM. Where can I find that? Sorry for the lack of knowing definite answers. I'm taking over this system and still learning some of the finer details.
 
It would be in your keycode list. Another way to tell it to go to the PRI and see if SL1 protocol is available that is what's used on PRI for the Private Network Application.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top