Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CDP issue - only works from outside, not internally ?? 1

Status
Not open for further replies.

M1north

IS-IT--Management
Sep 28, 2007
357
CA
OK,

I have a TIE route from one PBX to another:

TYPE RDB
CUST 00
ROUT 29
DES VOIP TIE
TKTP TIE
ESN NO
CNVT NO
SAT NO
IDEF NET
RCLS EXT
DTRK YES
DGTP PRI
ISDN YES
MODE PRA
IFC ESS5
SBN NO
PNI 00001
SRVC NNSF
NCNA YES
NCRD YES
CHTY BCH
CTYP UKWN
INAC YES
ISAR NO
TGAR 1
BCOT 0
DSEL VOD
PTYP PRI
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 7129
TCPP NO
PII NO
TARG 01
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
SIGO STD
ICIS YES
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
NBS 2048
NBL 4096
TFD 0
DRNG NO
CDR NO
MUS NO


PAGE 002

RACD NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
AUTH NO
TTBL 0
ALRM NO
ART 0
AACR NO

When calling externally all DID calls forward across tie. When I try and 4-digit dial internally, I get a busy.

Here is the phone I am calling from:

TN 20 0 1 2
DATE
PAGE
DES

DES
TN 020 0 01 02
TYPE 2616
CDEN 8D
CUST 0
AOM 0
FDN
TGAR 7
LDN NO
NCOS 4
RNPG 100
SSU
LNRS 24
XLST 3
SCPW
CLS UNR FBD WTA LPR PUA MTA FNA HTA TDD HFA
MWA XHD IRA NIA OLA VCE DRG3
POA CCSD TENA SWD LNA CNDA
CFTD SFD DDV CNID CDCA
ICDD MCTD CLBA AUTU
GPUD DPUA DNDD CFXA ARHD FITD CLTD ASCD
CFHD FICD NAID
DDGA NAMA
USRD ULAD RTDD OCBD FLXD FTTU
CPND_LANG ENG
RCO 1
HUNT 3100
LHK 2
TEN 11
LPK 0
AACS NO
DNDR 0
KEY 00 SCR 2080 0
CPND
NAME
XPLN 27
DISPLAY_FMT FIRST,LAST
01 SCR 4080 0
CPND
NAME
XPLN 27
DISPLAY_FMT FIRST,LAST
02
03 TRN
04 AO6
05 CFW 16 3100
06 MWK 3100
07
08 SCR 2011 0 MARP
09 MCK
10 ADL 16
11 ADL 16
12 ADL 16
13 RNP
14
15
DATE 31 JUL 2008

Am I missing something??
 
shouldn't be.. unless your frl is either above 4 or not defined in nctl.. i always x1 on targ for all my routes.. but on that i would look at my rlb for a dgt or some other block

john poole
bellsouth business
columbia,sc
 
How is the routing setup? How is the CDP setup? RLI/DMI references for 4,7,10 digits?

Mato' Was'aka
 
Is the number you are calling in the CDP programming? If the CDP isn't built - that may be why.
 
RLI 29
ENTR 0
LTER NO
ROUT 29
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 0
DMI 0
FCI 0
CBQ NO

ISET 1
MFRL 1

REQ prt
CUST 0
FEAT cdp
TYPE dsc
DSC 2081
DSC 2081
RLI 29



 
You said you get a "busy" - Would that be slow or fast busy?

If External Works, but 4-digit internal does not work, then things I'd check include:

~ The DID route's IDC entry, if any. See if digit conversion is taking place.

~ Verify the number - the phone you posted is DN 2080, the CDP entry you posted is 2081.





GHTROUT.com | FAQs | Recent Replies
 
Just thinking out loud here...

Can you dial the ACOD and the dial the number?

Since this is a VoIP trunk, do you have NRS?

What kind of PBX are you talking to? I see you have ESS5 as the interface. If its another Nortel I think it should be SL1.
 
Just noticed your RLI printout says FRL 0, but your MFRL says 1 - I think you need to change the MFRL to 0.
 
set has a ncos of 4, I don't think that would affect it.

Mato' Was'aka
 
Phone says "invalid condition. PLease try again"

This is killing me....I`ve tried a few things now.


RLI 29
ENTR 0
LTER NO
ROUT 29
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 0
DMI 0
FCI 0
CBQ NO

ISET 1
MFRL 0


REQ: prt
TYPE: rdb
CUST 0
ROUT 29

TYPE RDB
CUST 00
ROUT 29
DES VOIP TIE
TKTP TIE
ESN NO
CNVT NO
SAT NO
IDEF NET
RCLS INT
DTRK YES
DGTP PRI
ISDN YES
MODE PRA
IFC ESS5
SBN NO
PNI 00001
SRVC NNSF
NCNA YES
NCRD YES
CHTY BCH
CTYP UKWN
INAC YES
ISAR NO
TGAR 1
BCOT 0
DSEL VOD
PTYP PRI
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 7129
TCPP NO
PII NO
TARG 01 15
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
SIGO STD
ICIS YES
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
NBS 2048
NBL 4096
TFD 0
DRNG NO
CDR NO
MUS NO


PAGE 002

RACD NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
AUTH NO
TTBL 0
ALRM NO
ART 0
AACR NO
 
hmmm, does this mean anything?

TN 029 01
TYPE TIE
CDEN SD
CUST 0
NCOS 7 > this may be set to high?
RTMB 29 1
B-CHANNEL SIGNALING
TGAR 1
CLS UNR DIP WTA LPR APN HKD
P10 VNL
TKID
 
Post your NCTL in LD 87 for ncos 0 thru 7

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.
 
so is that the inbound trunk you posted? if so set your station to ncos 7

john poole
bellsouth business
columbia,sc
 
REQ PRT
CUST 0
FEAT NCTL
NRNG

SCH0274
NRNG 0 7

SCBQ YES
CBTL 10

NCOS 0

EQA NO
FRL 0
RWTA YES
NSC NO
CBQ YES
ROUT I
RADT 0

NCOS 1

EQA NO
FRL 1
RWTA NO
NSC NO
CBQ YES
ROUT I
RADT 0

NCOS 2

EQA NO
FRL 2
RWTA NO
NSC NO
CBQ NO
MPRI 0
PROM 0

NCOS 3

EQA NO
FRL 0
RWTA NO
NSC NO
CBQ NO
MPRI 0
PROM 0

NCOS 4

EQA NO
FRL 4
RWTA NO
NSC NO
CBQ YES
ROUT A
RADT 1

NCOS 5

EQA NO
FRL 0
RWTA NO
NSC NO
CBQ NO
MPRI 0
PROM 0

NCOS 6

EQA NO
FRL 0
RWTA NO
NSC NO
CBQ NO
MPRI 0
PROM 0

NCOS 7

EQA NO
FRL 7
RWTA YES
NSC NO
CBQ YES
ROUT A
RADT 1

TOHQ NONE
 
I noticed that you have tennant service, On the set you are set up for tennant 11. Does that tennant have access to the loop 29 trunks?

You also want to check your pre translation group xlst 3

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.
 
tnphoneman - you are truly a genious....thank-you!!

LD 93

REQ chg
TYPE racc
Cust 0
ROUT 29
ACC allow
ALOW all

Now working !!!

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top