CDINI problem on bc12

[mduzer]

hi everyone
i'm so confused...my problem is when an extension divertes to another extension in any case(busy - no answer) , when i call dir-A after 4-5 rings it diverts to dir-B but at this moment both of them(dir & div) ring. and it goes to all of our pabx.
Any help would be appreciated.

 

[sbcsu]

Great, but please can you tell us the PABX manufacturer.
There are multiple forums here for different PABX's

 

[curlycord]

lol, true dat!

It appears CDINI = Call diversion individual number initiate
And that there is a very small group that post about it and so happens to only in Tek-tips.

I think you need this forum mduzer for more looks:

https://www.tek-tips.com/viewthread.cfm?qid=963404

________________________________________

=----(((((((((()----=

http://www.curlycord.com

Toronto, Canada

Add me to LinkedIN

 

[mduzer]

thank you guys for your reply
i found it.. it was all about PARNUM=8 (Ringing signal for diversion).
our MD110 was set to PARNUM=8,PARVAL=1 which means ringing signal shall be sent to both ( first called party & divertee position).